Pay in 4 interest-free payments of $3.50 Learn more
Ships within 48 hours · Estimated delivery Sep 26 - Oct 1
Compensation temperature: -20～80℃
Positions: 12
2: IGN2 out
The connector required/used for the MaxxECU PWM 2 Stepper Idle Module
Pin 12 = GND
Connector 12-way Molex 120G housing (PWM idle stepper module) O2 SENSOR Compensation temperature: -20～80℃The connector required used for the MaxxECU PWM 2 Stepper Idle Module Don't forget: PWM 2 Stepper Idle Module Pinout: Pin 1 = Coil 1 Positive Pin 2 = Coil 1 Negative Pin 3 = Coil 2 Positive Pin 4 = Coil 2 Negative Pin 5 = PWM Input Pin 7 = +12V (from ignition key) Pin 12 = GND
US$ 99.95
US$ 59.95
US$ 20.00
US$ 89.95
US$ 59.95
US$ 89.95
US$ 59.95
US$ 154.00
US$ 89.95
