Body- Armguard G7/G9 Size and Model of Chassis:37" G9 The lower RR shock hole

The lower RR shock hole is the standard location with an extended hiem on the shock shaft

Diameter of

This aluminum panel is only available in white

There is plenty of flexibility to connect to the lower dzus plates

Move to the top hole with a standard shock shaft hiem if loosening-up the car is desired

Body- Armguard G7/G9 Size and Model of Chassis:37" G9 The lower RR shock holeThis aluminum panel is only available in white. Some fitting is required. Use a stepped unibit to drill dzus buttonholes and tin snips to remove any excess material. Use clamps to hold panel in place on chassis. Then with a pencil or pen mark the dzus holes on the inside of the panel.