90 Degree Round Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (1-5/8" OD, 6" CLR) 3-1/2" CLR 13 cubic inches of oil/minute

13 cubic inches of oil/minute output at full pressure (vs

3 x OD (See Die Charts for details

after springback

Outside Diameter of the Tubing (OD): 2" (50

Measure your bends while the material is still in the bender

90 Degree Round Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (1-5/8" OD, 6" CLR) 3-1/2" CLR 13 cubic inches of oil/minuteSpecs Outside Diameter of the Tubing (OD): 1 5 8" (41. 3 mm) Minimum Wall Thickness (DOM): 0. 083 (2. 1 mm) Minimum Wall Thickness (4130): 0. 083 (2. 1 mm) Minimum Wall Thickness (ERW): 0. 095 (2. 4 mm) Minimum Wall Thickness (Stainless): Contact for Details Minimum Wall Thickness (Aluminum): Contact for Details Minimum Wall Thickness (Other): Contact for Details Maximum Wall Thickness: 0. 134 (3. 4 mm) Centerline Radius: 6" (152. 4 mm) Maximum Degree