90 Degree Round Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (38.0 mm OD, 177.8 mm CLR) 0.134" Bend Stitching

Bend Stitching

This die fits the Portabender Tube and Pipe Bender for bending 1" by 1" square tubing at a centerline radius of 3-1/2" with a maximum degree of bend of 90 degrees after springback

Outside Diameter of the Tubing (OD): 14

-Input the settings for the roller locations and lateral guides

White laser engraving on black anodized aluminum for high visibility

90 Degree Round Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (38.0 mm OD, 177.8 mm CLR) 0.134" Bend StitchingSpecs Outside Diameter of the Tubing (OD): 38. 0 mm Minimum Wall Thickness (DOM): 0. 058 (1. 5 mm) Minimum Wall Thickness (4130): 0. 058 (1. 5 mm) Minimum Wall Thickness (ERW): 0. 065 (1. 7 mm) Minimum Wall Thickness (Stainless): Contact for Details Minimum Wall Thickness (Aluminum): Contact for Details Minimum Wall Thickness (Other): Contact for Details Maximum Wall Thickness: 0. 134 (3. 4 mm) Centerline Radius: 7" (177. 8 mm) Maximum Degree of Bend: