90 Degree Round Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (28.0 mm OD, 101.6 mm CLR) 4" CLR & Small Swing Arm Pin

& Small Swing Arm Pin

ready-to weld straight and angled notches in up to 2" OD tubing (NPS 1-1/2 pipe)

Note: Dimple Dies are rated for a maximum sheet metal thickness of 3/16" Mild Steel and 1/8" Chromoly

standard 6 cubic inches of oil/minute on competing models)

PRO will save you thousands of dollars in costly rework and material scrap

90 Degree Round Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (28.0 mm OD, 101.6 mm CLR) 4" CLR & Small Swing Arm PinSpecs Outside Diameter of the Tubing (OD): 28. 0 mm Minimum Wall Thickness (DOM): 0. 065 (1. 7 mm) Minimum Wall Thickness (4130): 0. 065 (1. 7 mm) Minimum Wall Thickness (ERW): 0. 083 (2. 1 mm) Minimum Wall Thickness (Stainless): Contact for Details Minimum Wall Thickness (Aluminum): Contact for Details Minimum Wall Thickness (Other): Contact for Details Maximum Wall Thickness: 0. 134 (3. 4 mm) Centerline Radius: 4" (101. 6 mm) Maximum Degree of Bend: