Silicone Hose, 1 1/4" I.D. 180 degree Elbow, 4" Legs 20789 HJ35 and HJ32) and Lined

HJ35 and HJ32) and Lined Hose Clamps (Part No

The 4-ply reinforcement results in a 5mm wall thickness (86mm / 3 3/8" and 67mm / 2 5/8" OD) and a working pressure rating over 18 psi (92 psi burst pressure)

Use with our Aluminum Splicing Nipples (HJ51 and HJ45) and Lined Hose Clamps (Part No

Slip the second hose over the other end until the two hoses meet in the middle

If you have to grip the hose so hard that you distort it as you turn

Silicone Hose, 1 1/4" I.D. 180 degree Elbow, 4" Legs 20789 HJ35 and HJ32) and LinedOur silicone hose is built for endurance and performance in custom coolant and intake plumbing applications. Each hose is hand crafted from multiple layers of silicone rubber with polyester reinforcing fabric between the layers. The silicone rubber remains flexible and tough from 50 C to +180 C ( 76 F to 356 F). These 180 degree elbows have a 1 1 4" ID with a smooth, shiny "wipe down" finish. Legs measure approximately 4 inches long (measured from the